PDA

View Full Version : front composite spring question


Baxis
09-05-2014, 02:20 AM
Tinkering with the van a bit, trying to figure out why it's sitting a bit low.
Here's the setup, 05 short 2500
The bump clearance is less than 1/2 "
The top spring blocks are different colours white/driver, red/passenger
Is this normal?
Thanks guys!

shortshort
09-05-2014, 11:33 PM
I recall reading here that yes, the colors should be different.

Baxis
09-08-2014, 08:00 PM
cheers! thank you!

shortshort
09-09-2014, 06:15 AM
Something to do with compensating for the weight of the driver. Does your van bottom out over bumps?

Baxis
09-09-2014, 07:14 AM
quite a bit, but since the Konis are bigger and not pressurized, I took them off and put some bs Gabriels and so far so good

shortshort
09-09-2014, 07:23 AM
That fixed the bottoming?