PDA

View Full Version : Sprintshift Gear Lever


mikeyp
08-12-2013, 09:43 PM
Hi - Does anyone know what each of the wires do on the connector to the Sprintshift gear lever? Just want to know the pin-out.

Thx !

NORTON
08-12-2013, 09:57 PM
Look in T1n data base for SPRINTSHIFT GEARBOX design and function.

mikeyp
08-12-2013, 09:59 PM
Thx! Kinda new here....although seems I have been registered a long while.

mikeyp
08-12-2013, 10:04 PM
You mean this:

http://sprinter-source.com/forum/showthread.php?t=26309&highlight=SPRINTSHIFT+GEARBOX+design+function ???

Yep - already read that, and it doesn't tell me what each of the wires do. As there are 6 wires on the gear leaver electrical connector, presume each wire does one of the following:

Earth
Auto
Neutral
+ Change Up
- Change Down
Reverse

Just need to know which is which ????

NORTON
08-13-2013, 10:06 PM
You mean this:

http://sprinter-source.com/forum/showthread.php?t=26309&highlight=SPRINTSHIFT+GEARBOX+design+function ???

Yep - already read that, and it doesn't tell me what each of the wires do. As there are 6 wires on the gear leaver electrical connector, presume each wire does one of the following:

Earth
Auto
Neutral
+ Change Up
- Change Down
Reverse

Just need to know which is which ????

Hi Mikey, Yes thats what I meant, sorry I havent any experience with the gear lever but that sounds logical, the transmission control would need an indication of what task to perform.
If you are having problems with the transmission let the Forum know as it could come from other obscure components and others may be able to shed some light on it.