PDA

View Full Version : 0d Code On Display


swassociates
07-28-2013, 08:48 PM
I haven't driven my van in quite sometime and when I started it today I noticed a 0d display in the odometer space for a few seconds then it went back to the odometer. I am assuming this means oil change time. I checked it with my OBD2 code reader and there were no stored codes. Is it just an oil change indicator? How do I reset it?

Thanks

2007 NCV3

mean_in_green
07-28-2013, 09:18 PM
Denotes zero days before service.

swassociates
07-28-2013, 10:02 PM
Denotes zero days before service.

How is it reset?

Thanks

swassociates
07-28-2013, 11:46 PM
I trolled around for a while and managed to find reset instructions. They worked great. If anyone is interested here they are. NCV3 with no steering wheel buttons.

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the "O" button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select "reset 51"
4. Now, when appropriate oil type is selected press "O" for 6 seconds until ''2'' is displayed.
5. Press "O" once again briefly and the '' reset done'' message will confirm that the job is done.
6. Pull the Key out