PDA

View Full Version : Wheels Continued


Boz Staggs
02-05-2013, 05:03 AM
I tracked down what wheels I need (want) to replace my steel wheels, and now I'm hunting down the best price.

Any information or leads on good deals for four OEM factory optional Alloy Wheels for an 06 T1N? The MB part number is MBA9034012802, and the Dodge part number is 5140692AA.

The best deal I've found so far is used wheels from originalwheels.com (http://www.originalwheels.com/dodge-wheels/sprinter2500rims-2006.php).
They're $175 each there, plus shipping.

However, Holaday on the NCV3 forum pointed out that he bought four OEM factory optional Alloy Wheels for his NCV3 for $96 each from Genuine Mercedes Parts. I checked that site, and they don't list the MB part number.

Any information is appreciated, including any forum members that might have some for sale. I also need the center caps (prefer blank or Dodge) and lug nuts (or is it longer alloy wheel bolts that I need?).

RedDino
02-05-2013, 01:03 PM
checkout this thread (http://sprinter-source.com/forum/showthread.php?t=23646). on the first page on the bottom there's a link to someone who sells them for $165 w/o lugs.

OldWest
02-06-2013, 12:19 AM
There is confusion on the Dodge sites about the alloy wheel size. Most list as 16 x 6 for both steel and alloy, BUT for 2004-2006, the alloys were sometimes listed as 16 x 6.5. The extra half inch in rim width allows 245/75-16 Lt to be mounted with minimal rubbing apparently.

Would be nice to confirm the correct alloy wheel size as 6.5 wide. Offset into would be good too--link to MB forum had Et70 listed for alloy.