programming Your KEY

kendall69

New member
I saw this on a site, it's similar to the one I did with a Toyota key, has anyone tried it?

This was for a Mercedes MI-320
What you need to do is this:

1) Get in and close all the doors.
2) insert your key in to the ignition cylinder
3) turn the key to position 2 (do not start)
4) turn the key off & remove
5) press & HOLD the lock button
6) press the unlock button 5 times
7) release the lock button
8) press any other button on the remote (ie tailgate)

you only have ten(10) seconds to do the entire procedure so keep trying.



This may or may not be the correct procedude for the Sprinter, does anyone have the procedure for the Sprinter?

Here's the link to the "find"
http://tech.bentleypublishers.com/thread.jspa?threadID=7202&tstart=0

Here's a link to Dodge programming:
http://autorepair.about.com/library/faqs/bl083i.htm
 
Last edited:

sikwan

06 Tin Can
This is very similar to our Subaru Forester.

Unfortunately, this doesn't work for our Sprinter. :thumbdown: We have to go to the dealership to have this done.

Seek
 

Top Bottom