| |
|
|
|||||||
| NCV3 Database Reference Information, Part Numbers, Recalls, TSBs, and etc. |
 |
|
|
Thread Tools | Display Modes |
12-30-2008, 04:06 PM
|
#1 |
|
Not Suitable w/220v Gen
Join Date: Mar 2007
Location: Seattle, WA - USA
Posts: 8,305
Thanks: 1,132
Thanked 2,757 Times in 1,577 Posts
|
North American NCV3 DXF drawing files
These files were harvested from www.dodge.com/bodybuilders. This site requires registration and approval from a human.
Given that Chrysler is fighting larger battles, I figured I'd download the info rather than force the forum member to register and wait for access which may not be granted for quite a while. These are all the non-PDF drawings available on that website at this time. I just now noticed that there are no passenger wagon drawings in this format. -Jon
__________________
2007 F/Liner 2500 Cargo Van, 144" WB, 3.92 Rear Axle Ratio, Buttons on the Steering Wheel, Contractor Package, Heated glass and seats, no spark plugs or windows in the cargo bay. US Tech info: http://www.sprintertekinfo.com US Parts info: http://epc.startekinfo.com (Subscribe to world passenger car and light transport) Americans may learn to use MB technical resources and parts information here: http://www.sprintertekinfo.com/epcdemo/start.swf |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
