| |
|
|
|||||||
| NCV3 Write-Ups Help other NCV3 owners by posting your experience working on your Sprinter. |
 |
|
|
Thread Tools | Display Modes |
12-21-2008, 06:21 PM
|
#1 |
|
Not Suitable w/220v Gen
Join Date: Mar 2007
Location: Seattle, WA - USA
Posts: 8,305
Thanks: 1,132
Thanked 2,758 Times in 1,577 Posts
|
Configuring StarMOBILE Desktop Client for Vehicle Simulation
I've noticed that google.com is returning Sprinter-Source and other auto enthusiast forums for searches containing StarMOBILE information. I wrote this information for StarMOBILE users and not specifically for Sprinter owners. I hope it helps all seekers of info.
Attached is a "Turn on Vehicle Simulation Mode in StarMobile" how-to document. The Windows software and device firmware versions used are cited within. I want to thank Andy "Doktor A" Bittenbinder. He both inspired the write up and verified the instructions. -Jon
__________________
2007 F/Liner 2500 Cargo Van, 144" WB, 3.92 Rear Axle Ratio, Buttons on the Steering Wheel, Contractor Package, Heated glass and seats, no spark plugs or windows in the cargo bay. US Tech info: http://www.sprintertekinfo.com US Parts info: http://epc.startekinfo.com (Subscribe to world passenger car and light transport) Americans may learn to use MB technical resources and parts information here: http://www.sprintertekinfo.com/epcdemo/start.swf |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
