Injector leak off metal connector info?

random

05 140" SHC 2500 Cargo
Hello,
Recently I had to replace one of the plastic fittings, and the replacement line I ordered is a POS. Going through threads here it is obvious that other vehicle's brass fitting will work on ours. But I am confused about which specific vehicle. Simply: where do I get brass fittings?⛄
Thanks!
 

slowgsr

Member
I would like to know as I broke the 90 (cylinder 1) on my original set, then off my parts van. I planned to use a t with a cap and a short piece of line.

Any idea what the quality is like on the europarts kit?
 

random

05 140" SHC 2500 Cargo
Haha. Im rocking a spare 2-headed T in the number 1 injector with a 16D nail jammed in the extra line for now.
 

surlyoldbill

Well-known member
I believe the brass fittings are only available as a unit, with a new return line already connected to all 5 of them. I replaced mine last year with part from EuropartsSD. I might vaguely remember someone posting a link to individual fittings.

I also snapped my plastic fitting by removing it too often.
 

220629

Well-known member
This is off topic. Intended for those who don't hate plastic and don't want to spend 126 bucks.

...



Amazon has the rather fragile fuel return plastic fittings.

These parts are not necessarily easy to track down using the Amazon search.

Complete 5 cylinder set
http://www.amazon.com/Mercedes-Spri...pebp=1438087226825&perid=0NQKBKBY82MEDSNSVK1H

4 cylinder set for spares (inset pictures appear identical)
http://www.amazon.com/Common-Inject...pebp=1438087295652&perid=0NQKBKBY82MEDSNSVK1H
vic
 
Last edited:

Top Bottom