GeorgeRa
2013 Sprinter DIY 144WB, Portland OR
Did you calculate or check with Rixen if adding 40' of 3/4" ID hose with many bends would not exceed maximum pressure drop at D5 flow of 4GPM? A 25W centrifugal pump with magnetically coupled rotor would max at about 3-4 PSI, so adding a 1-2 PSI back pressure can stall the flow below minimum required for D5 to operate properly.
You can calculate the pressure drop here - http://www.gates.com/catalogs-and-r...gineering-business-applications/pressure-drop
This is an example of a pump with double power motor. http://www.coleparmer.com/Product/M...nclosed_Motor_3_1_GPM_6_8_ft_115V/EW-72010-10
George.
You can calculate the pressure drop here - http://www.gates.com/catalogs-and-r...gineering-business-applications/pressure-drop
This is an example of a pump with double power motor. http://www.coleparmer.com/Product/M...nclosed_Motor_3_1_GPM_6_8_ft_115V/EW-72010-10
George.