Cruise control weird works but only a little

Status
Not open for further replies.

Bluejacket45

Handyman Plus
That may sound strange but my stock cruise control that worked perfect a bit a go. Now it will work or accelerates to 50mph and then turns off. If I try to set it above 50 it works for 1 second and quits. Things I did to the van recently include, trying to reprogram in a key using the two existing key method (that bye the way did not function) and having new mags and tires installed (also did not function) and where replaced yesterday with new tires on the old steel wheels. Any input on this would be greatly appreciated.

Thanks Pierre
 

mean_in_green

>2,000,000m in MB vans
Cruise function can be affected by seemingly irrelevant actions.

Check your tyre sizes, both axles compared to each other and what size tyres were fitted before. Do you have the same size on front and rear axles? (Required)
 

Bluejacket45

Handyman Plus
Thanks Right on the money!!! Very well known (Costco) tire shop did 225/75 on rear and 245/75 on front.

Thanks Again Pierre
 

mean_in_green

>2,000,000m in MB vans
You're welcome. You can alter the size within a set parameter, just have to keep it the same at each corner.
 
Status
Not open for further replies.

Top Bottom