Sprinter-Forum    
 

Go Back   Sprinter-Forum > Regional Discussions > USA


Reply
 
Thread Tools Display Modes
Old 10-11-2011, 07:37 PM   #1
ifd98125
 
Join Date: May 2010
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Exclamation Seattle repair shop? Hot Start problem.

Can anyone in the Seattle recommend a reliable repair shop for my 2005 Sprinter.
I am having a "Hot-Start" problem that replacing the Glow-Plugs did not solve.

Last edited by ifd98125; 10-11-2011 at 07:56 PM.
ifd98125 is offline   Reply With Quote
Old 10-12-2011, 02:01 AM   #2
o.trim
 
Join Date: Oct 2010
Location: sacramento, CA
Posts: 26
Thanks: 0
Thanked 4 Times in 3 Posts
Default Re: Seattle repair shop? Hot Start problem.

check the camshaft sensor. I know one guy he had the same problem for six months, until I checked his 2005 Sprinter with DAD. DAD said Camshaft positioning sensor. Sensor was replaced, problem solved. Also, that guy told me that he bought the camshaft sensor from the newer model (2007 up). He said that they are the same, the only difference is the price - for 2007-2011 more than twice cheaper.
o.trim is offline   Reply With Quote
Old 12-13-2011, 04:14 AM   #3
pyramidhvacr
 
pyramidhvacr's Avatar
 
Join Date: Sep 2010
Location: Memphis, Tn
Posts: 63
Thanks: 0
Thanked 15 Times in 12 Posts
Default Re: Seattle repair shop? Hot Start problem.

Camshaft sensor is the first step I too know someone took a fan with him to cool down the motor / found that this $30.00 camshaft sensor was the headache after many trip to the shop never found replacing many other parts. Lots of money in the trash. And add a ground wire to motor to battery ground post. Or keep jumper cable to jump motor to battery ground post to start if you have 1 click on a relay turning the key. This is a bad grounding system. Jumping from other auto's will not help @ battery.
pyramidhvacr is offline   Reply With Quote
Old 12-13-2011, 04:46 AM   #4
Brenton
 
Join Date: Nov 2009
Location: Renton
Posts: 24
Thanks: 3
Thanked 5 Times in 5 Posts
Default Re: Seattle repair shop? Hot Start problem.

Lynnwood Mercedes spendy, of course, snotty service manager. But great mechanics. Not sure what the glow plugs would help. I'd suspect the starter?
Brenton is offline   Reply With Quote
Old 12-13-2011, 05:21 AM   #5
glas1700
 
glas1700's Avatar
 
Join Date: Oct 2006
Location: Woodside, CA
Posts: 505
Thanks: 26
Thanked 135 Times in 110 Posts
Default Re: Seattle repair shop? Hot Start problem.

I wouldn't doubt that that new glow plugs didn't help because they aren't necessary for a hot start. It could be one or more leaky injectors or a failing camshaft position sensor. Does it have the original starting battery? Low cranking voltage will cause non-start issues.

You have a choice of two MB Sprinter dealers nearby, MB of Lynnwood and MB Tacoma. If you head down to the Portland area, there's McCoy Freightliner and Upscale Automotive. MB dealers aren't cheap, but from what I've read, their service is decent.

Byron

Quote:
Originally Posted by ifd98125 View Post
Can anyone in the Seattle recommend a reliable repair shop for my 2005 Sprinter.
I am having a "Hot-Start" problem that replacing the Glow-Plugs did not solve.
glas1700 is offline   Reply With Quote
Old 12-13-2011, 03:25 PM   #6
autostaretx
Erratic Member
 
autostaretx's Avatar
 
Join Date: Sep 2006
Location: Seattle
Posts: 3,820
Thanks: 477
Thanked 1,136 Times in 903 Posts
Default Re: Seattle repair shop? Hot Start problem.

I haven't used them (i used to ferry a friend there for his Jeep), but Town and Country Chrysler on Aurora Ave N took over the area's Dodge service obligations when the local Dodge dealers collapsed.
www.towncountrychryslerjeep.com/index.htm

--dick
__________________
2005 T1N 118" Freightliner 2500 Passenger Wagon (2.7L, 15" tires, standard (short) roof)
autostaretx is offline   Reply With Quote
Old 12-13-2011, 03:43 PM   #7
jdcaples
Not Suitable w/220v Gen
 
jdcaples's Avatar
 
Join Date: Mar 2007
Location: Seattle, WA - USA
Posts: 8,305
Thanks: 1,132
Thanked 2,757 Times in 1,577 Posts
Default Re: Seattle repair shop? Hot Start problem.

I sent a member with a T1N start problem to MB of Lynnwood.

They fixed it right the first time, after the independent shops wasted a fair amount of time and money experimenting.

This member is a business owner and he was happy with the result.

If it's important, take to the professionals with access to the best Sprinter information (for all US model years) and - by now - probably the most experienced shop in the Puget Sound area.

-Jon
__________________
2007 F/Liner 2500 Cargo Van, 144" WB, 3.92 Rear Axle Ratio, Buttons on the Steering Wheel, Contractor Package, Heated glass and seats, no spark plugs or windows in the cargo bay.

US Tech info: http://www.sprintertekinfo.com
US Parts info: http://epc.startekinfo.com (Subscribe to world passenger car and light transport)

Americans may learn to use MB technical resources and parts information here:
http://www.sprintertekinfo.com/epcdemo/start.swf
jdcaples is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 10:48 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Copyright © 2006 - 2012, Sprinter-Source.com