View Full Version : Extend a stay gas connection
dfbergeron
07-22-2009, 11:06 PM
I have a 2007 Roadtrek Agile ss on the DodgeSprinter Platform. Great Vehicle!!. Under the rear bumper is the connection to "quick connect" a fitting in order to run propane fueled appliances off of the RVs propane tank. What type of fittings are needed in order to connect up to this existing fitting in order to run my portable propane grill. I have emailed Roadtrek about a week ago, but have not heard back from them. Thanks. DFB.
bikergar
07-23-2009, 04:28 AM
df
I have a much older version of what you are describing. On mine I have a hose that will screw in to the tank end and has the proper fitting for my gas grill or most any gas appliance that also screws in. This (http://www.campingworld.com/shopping/product/propane-hose-assemblies-with-swivel-ends/3759) is the hose that I use. If yours is quick connect keep looking here (http://www.campingworld.com/search/index.cfm?Ntt=propane&N=0&Ntx=mode+matchallpartial&Ntk=p_keyword&Nty=1&Ntpc=1&x=20&y=15&No=0) and I believe you will find a hose that fits your application. I believe Home Depot, Lowes, and Propane and grill stores also have quick connect hoses.
gary
cajundjb
07-23-2009, 06:38 AM
I agree with Gary. You could also pull into a Camping World or other RV store and match it up immediately. :thumbup:
dfbergeron
08-27-2009, 09:26 PM
As a follow up I want to report back that none of the RV stores I went too had anything to match up to my RV, even a dealer who sells the very same unit. I went to an ACE Hardware store and the great people there made me just what I needed!!!:clapping:
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.