"Clear" Tail Light Lens' - Euro Style.

[MercSprinterConversions]

Hi Guys,

We have got a batch of Clear tail light lens' that we are clearing out and so we've got some great prices on them. They fit the T1N Sprinter and give your van a more modern and fresher appearence from the rear. I have attached an image below. As well as the great prices that we are offering on the tail lights, we've also got Free shipping on all products for all of March! (Free shipping To USA and Canada only). Relatively easy installation, just a case of switching the old unit out for this new one. The set includes both sides

The link for the lights are below:

http://mercedessprinterconversions.com/product_info.php?cPath=21&products_id=80

If you've got any questions then just let me know!

[Ami-Sven]

Don't you have to change some of the light bulbls??

Sven

[MercSprinterConversions]

HI,

When you remove your old tail light, there is a bulb holder clipped to it, this simply clips off the old one and clips onto the new tail lights. The only bulb that may possibly have to change is the turn signal bulb, this is the third bulb down from the top. If when you remove the bulb holder from the previous set of tail lights you find that you have a clear bulb, then you would simply need to replace the clear bulb with an orange bulb to retain the "orange" flash of the turn signal.

We can include the bulb holders and the two orange bulbs for an additional $15. Alternatively, If you didnt want the bulb holders, we can send you 2 orange bulbs for free with the order.

But other than the possible change of the turn signal bulbs. No other bulbs have to be changed. None of the customers who have purchased these tail lights from us have reported any problems when they were fitting them.

I hope this helps. If I can help you further then please don't hesitate to ask.

Many Regards. Ben.

[MercSprinterConversions]

Got another image of the lights installed.


Thanks.

[mean_in_green]

I've been down the replacement lights route before. My advice is to either go for genuine, or be sure that you're buying Hella units (OE supplier).

The generic no name suppliers will look alright at first glance but won't be as good quality when you look at them side by side.

[aspen]

MIG, are the clear ones made of poor plastic or what makes them of inferior quality? Thank you.
Val

[aspen]

Anyone wants to share their experience with clear tail lights? My original ones are cracked and one has a hole in it, trying to decide whether to buy OEM or these clears.