Spare parts/Wreckers

[sixtiesplus]

Anyone please can you direct us a Mercedes Sprinter wreckers preferably in Queensland but anywhere in Oz will do, thanks

[Altered Sprinter]

Mercedes Parts Victoria.
I'd have to chase the company up/ what parts are you looking for.

There are a few up in Brisbane will be there next week somewhere around Spring Hill! But can't think of the name of the wreckers:idunno:

Richard

[Eric Experience]

Sixtyplus.
What are you after ? I may be able to help. I am in melbourne and have a friend who wrecks sprinters. Eric

[sixtiesplus]

Hi Guys
Thanks for the replies, my husband is after a few bits and pieces which are missing on our 2003 LWB high roof Sprinter.
Mercedes hub caps, grey sun visor drivers side, wind deflecter on drivers side window, knob that holds the bottom cover on the drivers side door, we are also after a bullbar.
We are fitting out to go cruising so there will be other bits and pieces as we go along - we haven't had much luck posting searches with the wreckers net.
Cheers

[Eric Experience]

sixtiesplus.
The items you list are not worth much except the bull bar, so most wreckers would not cover there costs dealing with you, unless you can pick up and pay cash. Most vehicles in wreckers have front impact damage so bull bars are rare. I have a bull bar in stock it is made from plastic with a steel spring behind it. made by "team plastic". I took it of my 316 because it is to heavy in my opinion. you see them around on country ambulances. If you want it make an offer. Eric.

[sixtiesplus]

Hi Eric
Any chance of a photo of the bullbar? Also how does it bolt to the body or chassis?
Cheers Cec

[Eric Experience]

Sixtiesplus.
My bar is of the vehicle, you can see it on the www.teampoly.com.au web site labeled as sprinter 316. mounting requires 3 holes drilled horizontaly in each shassis rail pluss cutting a slot in the plastic bumper. It aso picks up the 2 bumper mount screws. Eric.

[sixtiesplus]

Hi Eric
Sorry must have been doing something wrong - I used your link to the website but a search showed no Sprinter 316 on site, it seems to be all poly tanks
Cheers Cec

[SPRINTERUK]

hi
just for info
the parts you are after
sun visor £22.30
centre wheel caps £6.10
door lower trim clip £0.95
front door window deflector (pair) £48.27
these are uk prices we can send to you
will need to find out postage
regards
chris
chris

[Eric Experience]

sixtiesplus.
If you scroll past the tanks you will find the bull bars. Eric.

[sixtiesplus]

hi
just for info
the parts you are after
sun visor £22.30
centre wheel caps £6.10
door lower trim clip £0.95
front door window deflector (pair) £48.27
these are uk prices we can send to you
will need to find out postage
regards
chris
chris

Hi Chris
Thanks for the info, is the price for set of wheel caps and are they held in by the wheel studs? - will get back to you, - for postage our postal location is Mission Beach, North Queensland 4852
Cheers

[sixtiesplus]

sixtiesplus.
If you scroll past the tanks you will find the bull bars. Eric.

Hi Eric
Have scrolled all over that site and now know how many different tanks you can buy but no bull bars, sorry
Cheers Cec

[SPRINTERUK]

hi
that is for each wheel cap
they are the small ones fit in the centre
regards
chris

[Eric Experience]

Sixtiesplus.
Do a google search on TeamPoly sprinter bullbars then click on team poly. Eric.

[sixtiesplus]

Sixtiesplus.
Do a google search on TeamPoly sprinter bullbars then click on team poly. Eric.

Thanks Eric, will do . Cec

[autostaretx]

Well, i tried Do a google search on TeamPoly sprinter bullbars then click on team poly.
..i never did find a direct "Team Poly" link in the five "hits" offered.

I did find "Smart Bars" PDF sheet, which shows a NCV3 wearing one:
http://www.smart-bar.com.au/arbitrage/pages/13/Smartbar%20Cat%20Oct%2007.pdf

I found an "Overlander 4WD" magazine article which -describes- the TeamPoly product
(but which doesn't have a URL/link to them)
http://www.overlander.com.au/equipment/index/full/8/Bull-Bars

And i too crawled through many many pages of the cited http://www.teampoly.com.au
Using that site's "Search" for "sprinter", "bull", "bullbar" all produced "There are no results for query bullbar" results.

If it's there, could you please provide a -direct- link to the TeamPoly bull bar page, it would help.

thanks
--dick

[Eric Experience]

Cec And Dick.
Sorry I am not good with computers.
The above is how I found the picture. But if that does not work for you, this is what I see in the address bar while I am looking at the picture.
www.onewater.com.au/cgi-bin/user.pl?dounload_file=&file=54
go to page12

[Eric Experience]

Cec And Dick.
Just tested the link and it requires a pasword. so going in via google is only way I know. I did it again.
Google teampoly sprinter bullbar, pages from aus, 2nd item, pdf team poly. good luck Eric.

[Altered Sprinter]

cek bear in mind the side window wind deflector is Australian made not the same as the UK deflectors these can still be purchased as a pair or left or right will post part numbers if required,
Roo bars it's a bit of a question as to which is best to purchase the alloy fully polished will set you back at least 1600 to 1800 bucks not sure of the ABS plastic units which are now being used exclusively on the ambos in Queensland both are air bag compliant.
PS there are the nufe bars these cost 600 hundred dollars alloy
This link will show you the ABS smart bars Mercedes Sprinter Spec Sheet Smart Bar (http://www.google.com/url?sa=t&source=web&ct=res&cd=1&url=http%3A%2F%2Fwww.smart-bar.com.au%2Farbitrage%2Fpages%2F197%2Fmercedes-sprinter.pdf&ei=5VxjSZykGIHasAOUjP2CDQ&usg=AFQjCNHTNLAluXIGO6HP_PjV2DuZHRmw_Q&sig2=i9_yBRKPNKer-T6KOMHp9g)
Richard
11150


11151

[sixtiesplus]

Hi Guys
Once again thanks for the info and photos, we are still interested in the wind deflector (drivers side) and would appreciate part number and name of supplier if you have one Richard. Thanks also for the heads up about it being different to the Brit one. Cheers

[Altered Sprinter]

Your very welcome, I'll run the numbers up in an hour or so as to just getting back from Melbourne so give me a little time please..I need coffee:drool:
Thanks Richard

[Altered Sprinter]

OK: Part number for Drivers side wind deflector...MB B6 47241120 RH side
MB B6 472 4121 LH side
Manufacturer Aunger Australia made under license to Mercedes Benz, therefore you only can source via your local MB Dealer.
Make sure you use a wax remover such as K&H on the top section of the visor as the double sided sticky tape will not adhere to a waxed surface. the same applies to the bottom of the visor section where the said tape adheres to the actual rubber window seal. if done correctly it will never fail.
PICS
You also may be interested in the headlight protectors ABS Plastic compound, as to considering just how much those lights cost :eek: if a flying stone, knocks one out.:yell:
MB Part Numbers MB B 6 4 82 31 30 they are sold as pairs only.

Always use a plastic cleaner such as Mequiar's Mirror Glaze Professional Clear plastic cleaner NO17 Or Meguiar's Plastx Clear Cleaner and polisher for deeper scratches. Works a treat on the headlamp plastic as well.
Both of the visors and lamp protectors, above are now a discounted line, However very few were sold, so there may be a few left in the warehouse, as the dealer would have to order them in .
Richard
11284

11285

11286