PDA

View Full Version : mb exterior sun visor


BBlessing
07-23-2008, 03:03 AM
here are the first pics of my sprinter with the new sun visor. unfortunately i did not get any pics of the install as i was racing against the darkness of night to get it installed. luckily i got it on straight if not a little high according to the pictures in the accessory catalog.

bb

mobileoilchange
07-23-2008, 04:56 AM
BB
where are your headlight washer covers?
you didnt drill holes in the roof for the visor did you?

BBlessing
07-23-2008, 06:14 AM
they are in the glove box, very perceptive of you. i am waiting for the protective vinyl for the paint, and the paint is only6 days old. yes i drilled holes in the "a-pillar". yes i was thinking the whole time, "what am i doing". i sealed the screws with rv roof sealant. if i ever decide i don't want the visor, i can have maaco weld up the holes and fix the paint. after all they did a wonderful job of painting the valance for the grill, perfect match.

bb

mobileoilchange
07-23-2008, 06:22 AM
did you use sheet metal screws or riv nuts?

BBlessing
07-23-2008, 07:32 AM
i used the stainless sheetmetal screws that came with it. i not only had to predrill the holes, but i had to prethread them with a steel screw also. rivnuts would require too large of hole for the bracket to fit on the "a-pillar".

bb

kmessinger
07-23-2008, 09:33 PM
they are in the glove box, very perceptive of you. i am waiting for the protective vinyl for the paint, -snip

bb

I didn't even notice I don't have the vinyl until reading this post. Wish it had come with the grill. Where did you order yours? I'll have to put something there before I leave for Alaska or I think I will end up scratching the paint with sand, etc.

Regards,

Keith

BBlessing
07-23-2008, 11:54 PM
my local dodge dealer. they are $1.40 each. i am kinda surprised that the mb grill conversion guys don't offer them as part of the conversion, or even separately.

bb

Jrmorgan
07-25-2008, 09:56 PM
Hey BB, were you going for a "Look" with the visor, or does it help in anyway?

:bounce::bounce::bounce:

BBlessing
07-26-2008, 01:53 AM
strictly for looks. i mounted irt a little higher than the accessory catalog shows it. mostly because of the light and rain sensor. it might help a little when the sun is at that certain angle, but mostly it is just for looks.

bb

Jrmorgan
07-26-2008, 01:59 AM
strictly for looks. i mounted irt a little higher than the accessory catalog shows it. mostly because of the light and rain sensor. it might help a little when the sun is at that certain angle, but mostly it is just for looks.

bb

Oh Fine just rub it in with the Light and Rain senor. Next thing you will tell me you have one of those interior motion detectors so when you enter the back the lights come on automatically....

:censored::censored::censored::censored:

BBlessing
07-26-2008, 05:36 AM
actually,... i do, but i have yet to figure out how to make that function work.:thinking: but unfortunately the sales guy that wrote up my order, somehow thought i said "no" on the cushion ride seat option. i am sooo mad at him!:bash::bash::bash:

bb

unimog
08-16-2008, 05:51 PM
BB, happened to me too on the suspension seats. Thought for sure that option was there but it came without. Worked on the dealer some and he has now ordered a new van with that option and he will let me swap out the parts to get the suspensions in my van

BBlessing
08-17-2008, 06:51 PM
wish my dealer would have done that for me.:cry:

bb

Lopchurng
09-21-2008, 05:49 PM
BB

I am going to be a new Sprinter owner soon...picking up at Sportsmobile Fresno this month. I will do the MB conversion and wanted to know if those vinyl protection stickers for the headlamp washer area have a part number or you just asked for them by description and they were able to find. Also on another thread you showed pics of them. Were they the dealer ones or did you have them made? You mentioned you wanted to make them bigger. Just wondering what you did since then.

Thanks

BBlessing
09-21-2008, 07:34 PM
the protective vinyl is not available anywhere but from me. there is no part number for them anywhere. i have a vinyl plotter that cuts adhesive vinyl. the thread you saw with the pictures was me offering them for sale to whoever wants them. here is that thread...

http://sprinter-source.com/forum/showthread.php?t=4027&highlight=protective+vinyl

bb

AlbertaBear
12-07-2008, 07:41 AM
Hi BB

Could you please tell us where you sourced the exterior sun visor.

Love to have one on mine.

B

BBlessing
12-07-2008, 02:14 PM
got mine from chris case at gerard mann across the big pond. his email is chriscase@gerardmann.co.uk.

bb

AlbertaBear
08-28-2010, 04:42 AM
Hi BB

long time since we discussed this, but I picked up my sun visor while I waited for connecting flights @ Heathrow.

But a question arises: you said you placed it higher than suggested so to not interfere with light and rain sensors.

I have them too, will they not work if visor is placed lower?

It's time to put the eyebrows on.

Chandlerazman
08-31-2010, 01:20 AM
Bruce, that looks absolutely gorgeous on the van. Black sets off off nicely.
You will need to update you avatar as I see you also no longer have the ladder rack on :smilewink:

BBlessing
08-31-2010, 01:46 AM
Hi BB

long time since we discussed this, but I picked up my sun visor while I waited for connecting flights @ Heathrow.

But a question arises: you said you placed it higher than suggested so to not interfere with light and rain sensors.

I have them too, will they not work if visor is placed lower?

It's time to put the eyebrows on.

if you put it too low, the rain sensor will never get wet, thereby negating your intermittent wiper function. there is a sensitivity adjustment in teh vehicle settings on the dash that helps to compensate a little.

bb

BBlessing
08-31-2010, 01:50 AM
Bruce, that looks absolutely gorgeous on the van. Black sets off off nicely.
You will need to update you avatar as I see you also no longer have the ladder rack on :smilewink:

thanks for the compliments. i get looks and compliments on it everywhere i go. i really want to put big yellow letters on it that say "FBI" :rad:

where did you see i no longer have the roof rack on? if you are referring to the pics that scroll across the top of the forum page, those are pre roof rack. i actually have six of the mercedes roof rack bars. that's two sets. two bars have been on my van now for about a year.

bb

BBlessing
08-31-2010, 02:04 AM
Oh Fine just rub it in with the Light and Rain senor. Next thing you will tell me you have one of those interior motion detectors so when you enter the back the lights come on automatically....

:censored::censored::censored::censored:

as it turns out, the motion sensors are for the alarm system only. and yeah i have those.

bb